Lan Interface Setup - Sapido GR-1222 User Manual

10. Clone MAC Address
If your ISP asks you to enter a specific MAC Address, please input the correct
info at the column.
11. Enable IGMP Proxy
The Internet Group Management Protocol (IGMP) is a communications
protocol used to manage the membership of Internet Protocol multicast
groups. IGMP is used by IP hosts and adjacent multicast routers to establish
multicast group memberships. You can choose to enable IGMP Proxy to
provide service.
12. Enable Ping Access on WAN
When users enable Enable Ping Access on WAN, it will make WAN IP
address response to any ping request from Internet users. It is a common way
for hacker to ping public WAN IP address, to see is there any WAN IP address
available.
13. Enable Web Server Access on WAN
This option is to enable Web Server Access function on WAN.
14. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset
to clear all the input data.
5.1.2

LAN Interface Setup

This page is used to configure for local area network which connects to the LAN port of your
Access Point. Here users may change the setting for IP address, Subnet Mask, DHCP, etc.
http://www.sapido.com.tw
75
User' s Manual V1.0