Lan Interface Setup - Sapido GR-1222 User Manual

7.1.2 LAN Interface Setup

This page is used to configure for local area network which connects to the LAN port of your
Access Point. Here users may change the setting for IP address, Subnet Mask, DHCP, etc.
1. IP Address
The default IP address is 192.168.1.254 (recommend).
2. Subnet Mask
Please enter the Subnet Mask address; it should be 255.255.255.0 for the
most time.
3. Default Gateway
Please enter the Default Gateway address. If you don' t know the address,
please contact your ISP.
4. DHCP
Users can choose to enable DHCP service or not. The DHCP server will give an
unused IP address to a computer which is requesting for one. That computer
must be a DHCP client, and then it can obtain an IP address automatically.
5. DHCP Client Range
The default value is 192.168.1.100 - 192.168.1.200. The DHCP server will
assign an IP to a computer from this range. The Show Client will display every
assigned IP address, MAC address, and expired time.
http://www.sapido.com.tw
201
User' s Manual V1.0