Sanyo VPC-E1500TP Instruction Manual page 48

Using Pre-composition Mode
When asking someone else to take images for you, but the images always don't come up right?
Pre-composition helps you get the background you want, even if you need to ask someone else to
record the image for you.
Basically, Pre-composition is a two-step process
• Take a pre-composed image.
• Shoot again according to the previous stored image.
1. Compose the background you want and press the
Shutter button (full press), which causes 1/3 of
semi-transparent image of the background to remain
on the LCD monitor.
2. Tap the button to cancel the semi-transparent
temporarily image.
3. Ask someone else to record a shot of you against your
original pre-composed background, telling him/her to
compose the image by using the 1/3 semi-transparent
screen image as a guide.
4. Move your position until photographer confirms your
whole or half body in the frame and in the right place.
5. Press the shutter button. Camera stores the image
produced by this step only.
.
47