Sanyo VPC-E1500TP Instruction Manual page 105

Insert the battery correctly, as
■
indicated
• When installing the battery, pay
attention to the indicated polarity (+
and –), and insert it correctly.
• If batteries are installed with the wrong
orientation, it may cause an abnormal
chemical reaction while in the charger,
an abnormal voltage flow when it is
used, or cause the battery to catch fire,
explode, leak or spew battery fluid, or
generate heat.
Always stop the recharging after
■
the prescribed recharge time,
even if the battery pack is not
fully charged
• If you continue to recharge the battery
pack, it may cause the battery pack to
catch fire, explode, leak or spew battery
fluid, or generate heat.
Charge the battery pack before
■
using it
• Always recharge the battery pack before
using it for the first time, or when using
it after it has been kept in storage for a
long time. During recharging, the
battery pack may be warm. This is
normal and does not indicate a
malfunction.
Note concerning the battery after
■
use
• When removing the battery, turn off the
camera and allow the battery to cool
down before removing it.
DANGER
WARNING
CAUTION
CAUTION
104
WARNING
—
—
—