Connecting External Components; Connecting The Fm,Am And Sw(Option) Antennas - Samsung MAX-DJ750 Instruction Manual

3 dvd mini component system, dvd/vcd/cd/mp3-cd/cd-r/rw playback
Hide thumbs Also See for MAX-DJ750:
Table of Contents

Advertisement

Connecting External Components

Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
Audio Cable
If the external analog component has
only one Audio Out, connect either left
or right.
L
R
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
Be sure to match connector colors.
2
Press AUX to select AUX.
' AUX' appears in the display.
13
SPEAKERS(6)
WOO
AUX IN
L
R
+
S.VIDEO
VIDEO OUT
COMPONENT VIDEO OUT
L
-
P
R
Y
+
R
CEN
-
SPEAKERS(6)
RE
+
-
R
L
+
FRO
-
Connecting the FM, AM ( MW ) and SW(option) Antennas
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
FM Antenna (supplied)
AUX IN
S.VIDEO
VIDEO OUT
COMPONENT VIDEO OUT
L
P
R
P
B
R
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
Cooling Fan
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
could rise and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
R
L
+
-
R
+
L
-
+
-
R
L
+
-
AM Loop Antenna
(supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
ANTENNA
AM
Spread the SW aerial out and attach the
ends to a wall, in the position providing the
FM
(75)
best reception.
SPEAKERS(6)
WOOFER
R
+
L
If reception is poor (e.g. distance from
-
Y
+
transmitter too great, walls blocking the
CENTER
-
LINE OUT
radio waves, etc.), install an outdoor aerial.
SPEAKERS(6)
+
-
R
L
+
-
AM
antenna connection
(MW)
1. Connect the AM loop antenna supplied
to the AM and
terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents