Listening To Radio; Presetting Stations - Samsung MAX-DJ750 Instruction Manual

Listening to Radio

You can listen to the chosen band (FM, MW(SW1,2) broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
2
1
Press TUNER/
Tune in to the
BAND button. desired station.
Automatic Tuning 1
•
The selection toggles back
and forth between "FM MW
(SW1,2)" each time the
Automatic Tuning 2
TUNER(BAND) button is
pressed.
Manual Tuning
increase or decrease the frequency incrementally.
Main Unit
Press the
TUNER/BAND
1 2
Select a broadcast
button to select the
station.
desired band (FM,
MW(SW1,2)).
Automatic Tuning 1
press
Knob to select the preset station.
Automatic Tuning 2
automatically search the band.
Manual Tuning
press
to tune in to a lower or higher frequency.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
55
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
SLEEP DIMMER
DISC SKIP ZOOM SLOW
MONO/ST
Press button to select REPEAT REMAIN SUB TITLE
the preset station.
TUNER TAPE AUX
BAND
Press and hold button
to automatically search the band.
VOLUME TUNING
PL II
MODE
Briefly press button to
TEST TONE
SOUND EDIT
Press the STOP ( ) button
P.SCAN
to select PRESET and then
TIMER/CLOCK CANCEL DIGEST
button or turn Multi Jog
TIMER ON/OFF LOGO SLIDE MODE
AH59-01379B NTSC/PAL
Press the STOP ( ) button to
select "AUTO" and then press
button or turn Multi-Jog Knob to
Press STOP ( ) to select
MANUAL and then briefly
or turn Multi Jog Knob

Presetting Stations

You can store up to:
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
Example: Presetting FM 89.1 in the memory
Press the
1
TUNER(BAND)
button and select
the FM band.
•
Each time the button is pressed,
the band switches between
"FM MW (SW1,2)".
PL II
kHz
EFFECT
MHz
4 Press to
select preset
number.
•
You can select between 1 and
15.
PROGRAM
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
or 15 FM stations 15AM stations
2 3
Press the TUNER
Press to
MEMORY button.
select "89.10".
• •
Refer to Step 2 on page 41 "PROGRAM" flashes in the
to automatically or manually display.
tune in to a station.
PROGRAM
kHz
MHz
To preset another
5 6
Press the TUNER
station, repeat
MEMORY button.
steps 2 to 5.
•
Press the TUNER MEMORY button before
'PROGRAM' disappears from the display.
•
'PROGRAM' disappears from the display
and the station is stored in memory.
Note
kHz
MHz
•
When listening AM/SW ,
button does not work.
on the
kHz
MHz
(Dolby Pro Logic II)
56