Table of Contents
Advertisement
Connecting the Video Out to your TV
METHOD 3 : Scart ....... (Better Quality)
If your television is equipped with an SCART input, connect an Scart Jack (not supplied) from the AV OUT jack on
the back panel of the main unit to the SCART IN jack on your television.
1. With the main unit turned off, press and hold the COMPONENT SEL. button on the remote control for over 5 seconds.
• <Y Pb Pr> and<RGB> will appear in the display.
2. Press the COMPONENT SEL. button shortly to select <RGB> to set SCART mode.
VIDEO SELECT Function
Press and hold the VIDEO SEL. button on the remote control for over 5 seconds.
• <COMPOSITE> or <RGB> will appear in the display. At this time, press the VIDEO SEL. button shortly to select between
<COMPOSITE> and <RGB>.
• If Scart (RGB Input) is equipped for your TV, press the VIDEO SEL. button to select RGB mode.
You can get a better picture quality by using Scart setting.
• If Scart (RGB Input) is not equipped for your TV, press the VIDEO SEL. button to select COMPOSITE mode.
METHOD 4 : Composite Video ....... (Good Quality)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
• This product operates in Interlace scan mode (576i) for component output.
• VIDEO SEL option works only when COMPONENT SEL mode is installed in GRB.
13
HDMI Function
What is HDMI (High Definition Multimedia Interface)?
This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when
using an HDMI connection.
•
Resolutions available for the HDMI output are 576p.
• If the TV does not support the configured resolution, you will not be able to see the
picture properly.
• When an HDMI cable is connected, composite ,component video and scart signals
are not output.
• See your TV owner's manual for more information on how to select the TV's Video
Input source.
Setting the HDMI Audio
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1
In Stop mode, press the MENU button.
2
Press the Cursor
3
Press the Cursor
the ENTER button.
MOVE
ENTER
RETURN
EXIT
4
Press the Cursor
the ENTER button.
•
ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
•
OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
MOVE
SELECT
RETURN
EXIT
the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• BASS/TREBLE/ECHO/KEY CONTROL/P.SOUND/EQ/DSP function is not available when
HDMI AUDIO is ON.
• MIC output is not available while HDMI AUDIO ON.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
button to move to <Audio> and then press the ENTER button.
button to move to <HDMI AUDIO> and then press
,
button to select <ON> or <OFF> and then press
14
Advertisement
Table of Contents
