Setting The Clock; Before Reading The User's Manual - Samsung MAX-KX75 Instruction Manual

Setting the Clock

For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1 2
Switch the system
on by pressing
POWER button.
•
3
4
Press ENTER.
The hour flashes.
•
Increase the hours :
• •
Decrease the hours : Increase the minutes :
•
Decrease the minutes :
5 When the correct
Note
time is displayed,
• You can display the time, even
press ENTER. when you are using another
function, by pressing
TIMER/CLOCK once.
•
"TIMER" appears in the display.
•
The current time is now set.
You can also use Multi-Jog or
•
Note
instead of , buttons in step 3,4.
17
Press TIMER/CLOCK
twice.
CLOCK is displayed.
When the correct
hour is displayed,
press ENTER.
The minutes flash.
button on the panel front

Before Reading the User's Manual

Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon Term
This involves a function available with DVD or
DVD DVD-R/DVD-RW discs that have been recorded and
DVD
finalized in Video Mode.
This involves a function available with a data CD
CD
(CD-R or CD-RW).
CD CD
MP3 This involves a function available with CD-R/-RW discs.
MP3
JPEG This involves a function available with CD-R/-RW discs.
JPEG
This involves a function available with MPEG4 discs.
DivX
(DVD R/RW , CD-R or CD-RW)
DivX
This involves a case where a function does not
CAUTION
operate or settings may be cancelled.
This involves tips or instructions on the page that help
NOTE
each function operate.
• In this manual, the instructions marked with "DVD (
discs that have been recorded in Video Mode and then finalized.Where a particular DVD type is
mentioned, it is indicated separately.
• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
Definition
)" are applicable to DVD-VIDEO and DVD-R/-RW
DVD
18