Connecting External Components; Connecting The Fm, Am Antennas - Samsung MAX-KJ650 Instruction Manual

Connecting External Components

Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX to select AUX.
•
' AUX' appears in the display.
13
Audio Cable
If the external analog
component has only one
Audio Out, connect either left
or right.
1. Connect the FM antenna supplied to the FM 75Ω
2. Slowly move the antenna wire around until you

Connecting the FM, AM Antennas

FM Antenna (supplied)
FM antenna connection
COAXIAL terminal as a temporary measure.
find a location where reception is good, then
fasten it to a wall or other rigid surface.
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
Cooling Fan
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the
temperature inside the unit could rise and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation
holes are covered with a newspaper or cloth, heat may build up inside the unit and
fire may result.)
AM Loop Antenna
(supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
AM antenna connection
1. Connect the AM loop antenna supplied
to the AM and terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
14