DVD-K300-GB
11/12/03 11:18
Connecting your System to the Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage.
1
Plug the main lead (marked AC CORD on the rear of the system) into
an appropriate socket.
2
Press the STANDBY/ON button to switch your DVD Karaoke System
on.
Page 9
L
R
Inserting Remote Control Batteries
Insert or replace remote control batteries when you:
Purchase the Mini Component System
Find that the remote control is no longer operating correctly
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
1
Place your thumb on the position marked
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.
2
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
+ on the battery against + in the battery compartment
– on the battery against – in the battery compartment
3
Replace the cover by sliding it back until it clicks into position.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
GB
on the battery
8