ENGLISH
Initial Setting : System Menu Setting
Setting the Clock (Clock Set)
Clock setup works in Camera Mode/Player Mode/M.Cam Mode/M.Player Mode. page 26
The date/time is automatically recorded onto a disc. Before recording, please set the date/time.
1. Set the [Mode] switch to [DISC] or [CARD].
2. Set the [Power] switch to [
3. Press the [MENU] button.
The menu list will appear.
4. Move the [Joystick] up or down to select <System>, then press the [Joystick(OK)].
5. Move the [Joystick] up or down to select <Clock Set>, then press the [Joystick(OK)].
The day will be highlighted first.
6. Move the [Joystick] up or down to set current day, then press the [Joystick(OK)].
The month will be highlighted.
To adjust the clock, select the Year, Month, Day, Hour, or Min by pressing the
[Joystick(OK)], then move the [Joystick] up or down to set respective values.
7. You can set the month, year, hour, and minute following the same procedure after
setting the day.
8. Press the [Joystick(OK)] after setting minute.
A message <Complete!> is displayed.
9. To exit, press the [MENU] button.
Notes
After the Lithium Battery loses its charge (after about 6 months), the date/time appears
on the screen as 00:00 01.JAN.2006.
You can set the year up to 2040.
If the Lithium Battery is not installed, data inputted will not be backed up.
30
(Camera)] or [
(Player)].
4
Camera Mode
►System
Clock Set
Remote
►On
Beep Sound
►On
Language
►English
Demonstration
►On
OK
MENU
Move
Select
5
Camera Mode
►System
Clock Set
01 JAN 2006
Remote
12 : 00
Beep Sound
Language
Demonstration
Adjust
OK
Select
MENU
8
Camera Mode
►System
Clock Set
01 JAN 2006
Remote
12 : 00
Beep Sound
Language
Complete!
Demonstration
Move
OK
Select
MENU
Exit
Exit
Exit