Using The Lithium Ion Battery Pack; Charging The Lithium Ion Battery Pack - Samsung VP-D651 Owner's Instruction Book

Preparation

Using the Lithium Ion Battery Pack

✤
The amount of continuous recording time available depends on.
- The type and capacity of the Battery pack you are using.
- How often the zoom function is used.
It is recommended that you have several batteries available.

Charging the Lithium Ion Battery Pack

1. Attach the Battery pack to the Camcorder.
2. Connect the AC Cord to the AC Power adapter and connect the AC Cord to
a wall socket.
3. Connect the DC cable to the DC jack on the Camcorder.
4. Turn the Power switch to OFF, and the charging indicator will start to flash,
showing that the battery is charging.
Blinking time
Once per second
Twice per second
Three times per second
Blinking stops and stays on
On for a second and
off for a second
5. When the battery is fully charged, disconnect the Battery pack and the AC Power adapter from
the Camcorder.
Even with the Power switched OFF, the Battery pack will still discharge.
[ Notes ]
I The Battery may contain a slight charge at the time of purchase.
I To prevent reduction in the life and capacity of the Battery pack, always remove it from the Camcorder after it is fully charged.
I The amount of continuous recording time available depends on:
- The type and capacity of the Battery pack you are using.
- How often the zoom is used.
- Type of use (Camcorder/Camera/With LCD screen etc.).
- Ambient temperature.
It is recommended to have additional battery packs available.
I Even when the Power switched Off, the Battery pack will still discharge if it is left attached to the device.
Charging rate
Less than 50%
50% ~ 75%
75% ~ 90%
90% ~ 100%
Error - Reset the Battery pack and
the DC cable
ENGLISH
Power Switch
4
<Charging indicator>
21 21