Connecting to a computer
Symptom
When accessing videos,
a computer does not
recognize your camcorder.
Cannot play a video file
properly on a PC.
Intelli-studio does not
function properly.
The image or sound on your
camcorder is not played on
your computer properly.
The playback screen is
paused or distorted.
Connecting to a computer
Symptom
You cannot dub correctly
110
110
using the Audio/Video cable.
•
Disconnect the USB cable from the computer and camcorder, restart the computer, then reconnect it
correctly.
•
A video codec is needed to play the file recorded on your camcorder. Install or run the built-in edit
software (Intelli-studio).
•
Make sure you insert the connector in the correct direction, and connect the USB cable to the USB jack
on your camcorder firmly.
•
Disconnect the cable from the computer and camcorder, restart the computer. Reconnect it properly.
•
Your computer may not have the necessary performance specifications to playback a video file. Check
the recommended computer specifications.
•
Exit the Intelli-studio application, and restart the Windows computer.
•
Intelli-studio is not Macintosh compliant.
•
Set "PC Software" to "On" in the Settings menu.
•
The Intelli-studio program may not run automatically. If this occurs, open the CD-ROM drive that has the
Intelli-studio program on it in My Computer, and then run iStudio.exe.
•
Video playback or sound may stop temporarily depending on your computer. The video or sound of files
copied to your computer are not affected.
•
If your camcorder is connected to a computer that does not support Hi-speed USB (USB2.0), the
images or sound may not be played back correctly.
The video and sound files copied to your computer are not affected.
•
Check the system requirements to play a video. page 96
•
Exit all other applications running on the computer.
•
If a recorded video is played on your camcorder when it is connected to a computer, the image may not
play smoothly, depending on the transfer speed. Please copy the file to your PC, and then play it back.
•
The Audio/Video cable is not connected properly. Make sure that the Audio/Video cable is connected to
the proper jacks, i.e. to the input jacks of the device used for dubbing an image from your camcorder.
page 94
Explanation/Solution
Explanation/Solution
Troubleshooting