Initialization Menu; Initialize The Camera - Samsung SCP-3120 User Manual

Functional Description
AUX Output menu is to operate the camera's peripheral devices such as lamps and sirens through
the controller and switches as well as through network communications.
OUT Off 1,2 :
- When an alarm event occurs, the output force can be terminated.
NO
⇨
COM
AUX Off
Notes
 •   C onnectingthepowerconnectorandGNDincorrectlytotheAuxterminal'sNOandCOM
ports may cause a short circuit and fire, damaging the camera.
 •   T hemaximumpowercapacityofthebuilt-inrelayis30VDC/2A,125VAC/0.5A,and
250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera's
lifespan and damage it.
84
SPEED DOME CAMERA
NO
COM
AUX On
User Guide
Initialize

30. Initialization Menu

▶ Main Menu/Initialize
Power On Reset :
Main Menu
Restarts the camera.
Camera Setting
Factory Default :
Sequence Setting
Enables resetting the camera to its factory default settings.
P/T Setting
When the mode is selected, all custom data such as preset
OSD Setting
locations is deleted from the camera.
Alarm Setting
Use this function if it is necessary to reset the settings of
Initialize
the camera.
Password Setting
Camera Default :
Status
Resets the camera zoom module to the Factory Default
➡
mode; use if you want to reset all camera settings including
Exposure and Backlight.
Initialize
Auto Refresh :
Power On Reset
Enables optimizing the status of the camera's built-in
electric circuits and components on a regular basis. (A
Factory Default Set
regular operation can be scheduled.)
Camera Default Set
This mode can be used to maintain and repair the current
Auto Refresh OFF
settings of the camera when anomalous operations occur:
e.g. The camera happened to directly face a light source, or
the settings have been canceled after the camera
repeatedly rotated in all four directions for a long time to
monitor a specific location.
The default setting is Off.
- Off, 1~7 Days : Selecting Off disables Auto Refresh and
selecting 1~7 Days automatically executes it after 1~7
days has passed.
✽ Auto Refresh takes approximately 10 seconds to finish. If
Auto Refresh activates in the middle of a sequence action,
the camera pauses the sequence action and performs an
Auto Refresh, then resumes the sequence action once the
refresh is complete.
SPEED DOME CAMERA
85
User Guide