Connecting Vhf And Uhf Antennas; Connecting Cable Tv - Samsung PL-50P3H Owner's Instructions Manual

Connecting VHF and UHF Antennas

Antennas with 75-ohm Round Leads
If your antenna looks like this:
Plug the antenna lead into the VHF/UHF terminal
1
on the PDP.
Use the Antenna Cable, an accessory included
in the product package.

Connecting Cable TV

You can connect different cable systems to your PDP, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
Plug the incoming cable into the VHF/UHF terminal on
1
the PDP.
Use the Antenna Cable, an accessory included
in the product package.
Cable with a Cable Box that Descrambles All Channels.
Find the cable connected to the ANTENNA OUT
1
terminal on your cable box. This terminal might be
labeled "ANT OUT", "VHF OUT", or simply "OUT".
Connect the cable to the VHF/UHF terminal on the
2
PDP.
Use the Antenna Cable, an accessory included
in the product package.
20
it has 75-ohm round leads.
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial
cables (which you can buy from your Samsung dealer or any electronics store).
Find and disconnect the cable that is con-
1
nected to the ANTENNA IN terminal of
your cable box.
This terminal might be labeled "ANT IN",
"VHF IN", or simply, "IN". Connect this
cable to a two-way splitter.
Connect a coaxial cable between an OUT-
2
PUT terminal of the splitter and the IN termi-
nal of the cable box.
Connect a coaxial cable between the
3
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
Connect a coaxial cable between the
4
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
Connect the last coaxial cable between the
5
OUT terminal of the RF (A/B) switch and
the VHF/UHF terminal on the PDP.
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually
channel 3 or 4.)
21