Selecting A Signal Source (External A/V) For Pip; Swapping The Contents Of The Pip And Main Image; Changing The Pip Channel - Samsung LN-R237W1 Owner's Instructions Manual

P C
I C T U R E O N T R O L

Selecting a Signal Source (External A/V) for PIP

3
Press the UP/DOWN
buttons to select "Source",
then press the ENTER
button.
Select the source of the sub
picture (PIP) by pressing the
UP/DOWN buttons and
press the ENTER button.

Swapping the Contents of the PIP and Main image

4
Press the UP/DOWN
buttons to select "Swap",
then press the ENTER
button.
Alternate method:
Press the SWAP button under the remote's cover.

Changing the PIP Channel

5
Press the UP/DOWN
buttons to select "Channel",
then press the ENTER
button.
Press the UP/DOWN
buttons to select the desired
channel in the PIP window.
Continued...
[PC/HDMI modes only]
[PC/HDMI modes only]
41
English-
When the main picture is set to TV/
AV1/AV2/S-Video/Component1/
Component2, only HDMI can be
selected and when the main picture
is set to PC/HDMI, only TV/AV1/
AV2/S-Video/Component1/
Component2 can be selected.
Source selection is possible only
when PC or HDMI is connected.
If main picture is in PC Mode,
"Swap" is not available.