Contents; Selecting A Signal Source (External A/V) For Pip; Swapping The Contents Of The Pip And Main Image; Changing The Pip Channel - Samsung LTN226W Manual

08.CHAPTER4_EN 9/2/03 3:25 AM
S
P E C I A L

Selecting a Signal Source (External A/V) for PIP

Press the TV/VIDEO(PIP) button repeatedly to cycle
through all of the available signal sources:
"TV", "Video", "S-Video", "Component 1" and "Component 2".
Swapping the Contents of the PIP image and Main image
When you press the SWAP button,
the image in the PIP window will appear on the main
screen, and vice versa.

Changing the PIP Channel

Press the PIP CH
that appears in the PIP window.

Changing the Location of the PIP Window

When you press the LOCATE button repeatedly,
the PIP window moves from corner to corner on the
TV screen.

Changing the Size of the PIP Window

Press the P.SIZE button to alternate between a
smaller and larger PIP window.
Page 46
F
E AT U R E S
/ button to change the channel
English-
For more information about
external A/V components and
signals, see "Viewing a VCR or
Camcorder Tape" on page 28.
If you select "TV", the PIP image
is the same as the main image.
While the main screen is in
PC mode, it does not work.
46