2. Press
3. Press
4. Select the desired entry and press
5. Press the left softkey
Edit the entry.
6. Press and hold
once to erase just the last number.
7. Enter the phone number using the keypad and press
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can identify
the caller by the ringer type. (See "Ringer Types" on page 76.)
To select a ringer type for an entry:
1. Press the left softkey
2. Press
3. Press
4. Select the desired entry and press
5. Press the left softkey
Edit the entry.
6. Press the navigation key down until Default is selected and
press the left softkey
7. Using the navigation keys, select Default Ringer, Preloaded
or Downloaded and press
8. Press the navigation key up or down to highlight and listen
to the desired Ringer. Press
9. Press
42 Contacts
for Contacts.
for List Entries.
to erase the entire number or press
for Contacts.
for List Entries.
to save the changes to the contact entry.
.
for Options, followed by
for MENU.
.
for Options, followed by
for Edit.
.
to select the desired ringer.
to
.
to