Palm Users; Quick Reference - Samsung SPH-I500 User Manual

Palm Users

You must have Palm Desktop for Windows version 4.1 or higher to
perform a HotSync operation with the SPH-i500 handset.

Quick Reference

Avoiding Problems with your i500
DO NOT plug in the cradle or data cable prior to installing the
1.
USB drivers on the distribution CD! If you have already done so,
please see the "Common Problems" section with the question "I
am having problems when trying to install a USB device or a
USB device is not recognized." for resolution.
The i500 is a native-mode USB device; you MUST have "Local
2.
USB" checked in HotSync to ensure proper syncing with your PC
or laptop. If you also have Palm OS serial devices that you sync to
your system, we recommend that you leave the "Local Serial"
unchecked when not HotSyncing the legacy Palm OS serial
device(s) to avoid potentially confusing error messages from
HotSync.
NEVER plug in the USB cable while your system is booting up.
3.
Plug in the USB cable prior to booting or after the system has
completely booted up and the HotSync icon is showing in your
system tray.
NEVER attempt to start a HotSync operation while your system is
4.
booting up. ALWAYS wait until you see the HotSync icon in the
system tray prior to starting a HotSync operation.
iv