[Video Out] Setting The Output Format For A Tv Connection; [File No.] Starting Image File Numbers From 0001 - Rollei dk4010 User Manual

Introduction
[BRIGHT CNTRL] Adjusting the LCD Monitor Brightness | [FORMAT] Initializing Memory Cards | [POWER SAVE] Having the Camera Turn Off Automatically to Save Power | [MODE LOCK] Preserving Your
Function Settings | [BEEP] Adjusting the Volume of the Camera Button Beep | [SHUTTER VOL] Adjusting the Volume of the Shutter Sound | [SELECT LCD] Selecting the Display Used at Startup | [START
SCREEN] Selecting the Startup Screen | [ZLANGUAGE] Selecting the Menu Language |
[MODE RESET] Resetting Function Settings

[VIDEO OUT] Setting the Output Format for a TV Connection

You can select NTSC or PAL as the video output format. Different TV signal
formats are used in different countries, and you should set the video
output to the correct format for your destination country.
1
Set the mode select dial to "G" and
turn the camera on.
2
Press the up u or down d button to
select [VIDEO OUT] and then press the
right button r.
3
Press the up u or down d button to
select the desired setting and then press
the OK button E.
The selected setting is applied and the Set Up menu screen reappears.
[NTSC] : Video output format used in, for instance, Japan and the
U.S.. (Default)
[PAL] : Video output format used mostly in Europe.
B Note
This setting is retained when you turn the camera off.
Contents (Top page) Detailed Contents
Getting Ready Taking Pictures
Index
Playback
[VIDEO OUT] Setting the Output Format for a TV Connection
GB-164
Nomenclature
Set Up

| [FILE NO.] Starting Image File Numbers from 0001 |

SET UP(3/3)
LANGUAGE ENGLISH
VIDEO OUT NTSC
FILE NO. EXECUTE
MODE RESET EXECUTE
SET UP(3/3)
LANGUAGE ENGLISH
VIDEO OUT NTSC
FILE NO. PAL
MODE RESET EXECUTE
Menus and Settings Troubleshooting