Using Controllers To Modify The Sound - Roland V-Synth GT Quick Start Manual

03

Using controllers to modify the sound

You can apply a variety of eff ects to the sound by touching the Time Trip pad located in the left of
the V-Synth GT's panel, or by moving your hand above the D Beam controller.
1.
Select preset patch number 301.
→ "Selecting a patch" (p. 24)
Time Trip Time Trip
2.
Press the Time Trip pad's [TIME TRIP] button.
3.
While holding down a note on the keyboard, touch the Time Trip pad.
By moving your fi nger in a circle on the Time Trip pad, you can produce an eff ect similar to
"scratching. "
Assignable Assignable
4.
Press the Time Trip pad's [ASSIGNABLE] button.
5.
While holding down a note on the keyboard, touch the Time Trip pad.
26
What is Time Trip?
Time Trip uses certain fea-
tures of VariPhrase, and lets
you use your fi nger to control
a wave's playback position
and speed.
While holding down a note
E T E T ]
on the keyboard, touch the
it
Time Trip pad; the currently-
sounding wave will stop playing. When you move your fi nger in a
clockwise circle, the wave will continue playing. If you move your
fi nger in a counter-clockwise circle, the wave will play backward.
This diff ers from "scratching" on a turntable in that you can con-
trol the playback without aff ecting the pitch, meaning that you
can play these sounds at specifi c pitches.
By moving your fi nger up/down/left/right on the
SIG G NA A B B GN N A LE]
Time Trip pad, you can apply the eff ect that is
assigned for each patch.
✍
If you press the Time Trip pad's [HOLD] but-
ton, the eff ect will be maintained even after
you take your fi nger away from the Time Trip
pad.