Chart Set Up Parameters; Customize Chart - Raymarine SL70RC PLUS Series User Manual

Chapter 7: Setting Up the System Defaults

7.7 Chart Set Up Parameters

The CHART SET UP option allows you to set up the chartplotter according to
your system configuration and your personal preferences.
The following table lists the Chart Set up parameters and their options, shows
the factory default setting, and provides a space for you to make a note of your
new default setting. Each parameter is described in the following subsections.
Table 7-7:
Parameter

CUSTOMIZE CHART

PLOTTER MODE
CHART
ORIENTATION
OBJECT
INFORMATION
WAYPOINT SYMBOLS
WAYPOINT NUMBERS
DEFAULT WAYPOINT
SYMBOL
HEADING VECTOR
COG VECTOR
TIDE VECTOR
RADAR/CHART
SYNCH
DATUM SELECTION
POSITION OFFSET
Customize Chart
This provides a list of chart options, enabling you to specify how the chart
features are displayed. Most options can be toggled between on, off and
custom - custom passes on/off control to the SCREEN soft keys (see
Customizing the Screen Presentation Options on page 2-14).
The following features can be set using Customize Chart, factory default
settings are shown in bold type:
Chart Set Up Parameters
Options
See below for details
OFF, ON
NORTH UP, COURSE UP,
HEAD UP
OFF, ON
OFF, ON
OFF, OFF
, , ,
OFF, 3 MINS, 10 MINS,
INFINITE
OFF, 3 MINS, 10 MINS,
INFINITE
OFF, 10 MINS, 1 HOUR,
INFINITE
OFF, ON
WGS 84, LOCAL
OFF, ON
Factory Default New Default
OFF
NORTH UP
ON
ON
ON
OFF
OFF
OFF
OFF
WGS 84
OFF
7-17