The Jacks On The Back Of The Dvd Player - RCA RC5215P User Manual

Connections & Setup

The Jacks on the Back of the DVD Player

When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right
Audio to Right Audio, etc.
AC IN
Insert the AC power
cord into the DVD
Player and plug the
other end into an AC
outlet.
Pr
Pb
AC IN
Y
Y, P , P
B R
(Component Video Output)
Use these jacks to connect to
a TV with Component video
input jacks. Unlike a single
video input, component
video maintains the video
signal as three separate
signals through these three
jacks. This connection
provides optimum quality.
To ensure maximum picture
quality, use three video-
grade cables for the Y, P
and P connections. Note
R
that it is essential to match
the color coded connectors
with a compatible TV.
14
AUDIO OUT R and L
Insert audio cables (left
and right) from these jacks
on your DVD player to the
corresponding Audio Input
jacks (left and right) on
your TV or receiver.
DIGITAL
AUDIO
OUT
S-VIDEO
RIGHT LEFT
VIDEO OUT AUDIO OUT
S-VIDEO
If your TV has an
S-Video jack, you can
connect an S-Video
cable for increased
video quality. The
S-Video cable only
carries the picture
signal; remember to
connect the left and
right audio cables.
,
B
DIGITAL AUDIO OUT
Use a digital optical cable
(not provided) to connect
your DVD Player to a
compatible Dolby Digital or
DTS receiver or decoder.
VIDEO OUT
(Composite Video Output)
Connect a video
cable to this jack and
to the Video Input
jack on your TV.
Chapter 1