Qt474 - Q-See QT454-403-5 User Manual

QT474

FRONT PANEL
QT474
ITEM NAME FUNCTION
1 INDICATOR Shows the recording, network and power status of the DVR.
LIGHTS
2 INFRARED Receives signals from the remote control
WINDOW
3 Press and hold 10 seconds (or until you hear a beep) to switch
VIDEO MODE
BUTTON video output from the VGA port (default) to the BNC video out
port.
4 USB PORT Used for external USB backup devices. The mouse will not
function in this port.
12
2
1 3
REC Net Power
TV/VGA
4
REAR PANEL
ITEM NAME FUNCTION
1 AUDIO IN 2 Channels of audio input
2 VIDEO IN Video input from up to 4 cameras
3 VIDEO OUT BNC connector for TV or monitor
4 VGA PORT VGA output for 19" or larger monitor
5 Use to turn on the DVR as well as to turn off after powering
POWER
SWITCH down from within the GUI
6 AUDIO OUT BNC Audio output for amplified speaker
7 Network (ethernet) port
LAN
8 USB PORT For the USB mouse
9 PTZ Connections for Pan-Tilt-Zoom speed dome cameras.
10 DC IN Power input for 12V DC power supply
2 4
1 3 5
VGA
1
1 3
VIDEO OUT
2
2 4
AUDIO OUT
AUDIO IN VIDEO IN LAN USB DC 12V
6 7 8 9 10
13