Part Names And Functions; Main Unit - Pioneer PDP-4304 Operating Instructions Manual

Part Names and Functions

Main Unit

Main unit
2 3
Main unit
1
Remote control sensor
Point the remote control toward the remote sensor to
operate the unit (page 8).
2
ON indicator
Lights green when the plasma display is operating
(page 25).
When flashing, the indicator is used to indicate error
messages (page 44).
3
STANDBY indicator
Lights red when the unit is in standby mode (page 25).
When flashing, the indicator is used to indicate error
messages (page 44).
4
Handles
The plasma displays PDP-5004 and PDP-4304 utilize
differing methods of handle attachment, but the
handles themselves are used in the same way.
PDP-4304
4
4
Operation panel on the main unit
5 6
Operation panel on the main unit
5
STANDBY/ON button
Press to put the display in operation or standby mode
(page 25).
6
INPUT button
Press to select the input (page 25).
7
SCREEN SIZE button
Press to select the screen size (page 27).
8
VOLUME (+/–) buttons
When not indicated for use in onscreen menu items,
these buttons are used for adjusting the sound
volume (pages 25 and 26).
9
AUTO SET UP button
When using computer signal input, automatically sets
the [POSITION], [CLOCK] and [PHASE] to optimum
values (page 33).
PDP-5004
1
7 8 9
5
EN