Other Operations; Setting The Purecinema Mode - Pioneer PDP-4304 Operating Instructions Manual

Other Operations

Setting the PURECINEMA Mode

Allows even higher fidelity DVD playback of film recordings and
other images.
Note
Make settings individually for each input.
Remote control unit
1
Press the MENU button to display the menu
screen.
STANDARD
PICTURE SCREEN
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
COLOR TEMP.
PICTURE RESET
ENTER
SET
2 Use the 2/3 buttons to select [SETUP].
STANDARD
PICTURE SCREEN
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
ENTER
SET
36
EN
MENU
2/3
SET
5/∞
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
ON
:
MID
:
ON
:
MID
EXIT
MENU
INPUT1
SETUP OPTION
:
OFF
:
AUTO
:
480p
:
COMPONENT
EXIT
MENU
3 Use the 5/∞ buttons to select [PURECINEMA],
and press the SET button.
STANDARD
PICTURE SCREEN
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
ENTER
SET
4 Use the 2/3 buttons to select the desired
[PURECINEMA] mode.
PURECINEMA
SET SET
Status at the time of factory default setting
During 480p and 720p signal input: OFF
During input of a video signal other than those above:
STANDARD
Each time the button is pressed, the screen mode
setting changes as shown:
[PDP-5004, PDP-4304]
3 OFF 2 3 STANDARD 2
3 ADVANCE 2
¶ OFF ················ [PURECINEMA] function is disabled.
¶ STANDARD ···· When playing DVDs and Hi-Vision
film images recorded at 24 frames/
sec, the recorded data is
automatically detected and
adjustments made to allow optimum
experience of the original beauty of
the film image.
¶ ADVANCE ······ When playing DVDs of film images
recorded at 24 frames/sec, the
recorded video information is
automatically detected and signals
are converted to 72 Hz for playback,
thus recreating the fluid movement
of a movie theater screen, and the
sense of film's true visual quality.
Note
You cannot select [STANDARD] during progressive signal such as
480p or 720p input.
INPUT1
SETUP OPTION
:
OFF
:
AUTO
:
480p
:
COMPONENT
EXIT
MENU
:
OFF
MENU EXIT