Philips RQ1075 User Manual page 19

2 Pull open the three shaving heads one by one.
 Rinse all three shaving heads and all three hair
chambers under a hot tap for 0 seconds.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
 Carefully shake off excess water and leave the
shaving heads open to let the shaving unit dry
completely.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
Cleaning the shaving unit with the brush
supplied
1 Switch off the shaver.
2 Pull open the three shaving heads one by one.
 Clean the shaving heads and the hair chambers
with the brush supplied.
 Close the shaving heads.
English
21