Philips Norelco G290 User Manual page 14

4 Blow and/or shake out any hair that may
have accumulated in the attachment.
◗
The shaving foil is very delicate and should not
be handled.
◗
If foil becomes damaged, replace it. Do not
apply pressure to shaving foil.
5 Do not clean the foil with the brush, as this
may cause damage.
6 Place the attachment back on the Groomer
or place it in the storage stand.
This Groomer has no other user-serviceable
parts. Any other service should be performed by
an Authorized Norelco Service Location.
Storage
◗
Be sure Groomer is turned OFF. Remove cord
from outlet and Groomer before storing in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
◗
Store the Groomer and attachments in the
storage stand to prevent damage.
◗
Do not wrap cord around Groomer or stand
when storing.
◗
Store cord in a safe location where it will not
be cut or damaged.
◗
Do not place or store Groomer where it can
fall or be pulled into a tub or sink, water or
other liquid while plugged in.
Replacing Trimmer Cutting Unit
If your cutters become damaged or worn, do not
continue using the Groomer. Cutters should be
replaced immediately by an Authorized Norelco
Service Location.
Replacing The Micro Shaver Foil
If the shaving foil is worn or damaged, do not
continue using the appliance. Replace the shaving
foil immediately.
A worn or damaged shaving foil should only be
replaced with an original Philips shaving foil, which
is available at an authorized Norelco Service
Location.
1 Remove the detachable shaving head by
pulling it from the appliance (fig. 28).
2 Remove the shaving foil by pushing it out of
the shaving head (fig.29).
3 Place the new shaving foil carefully in the
shaving head (fig. 30).
4 When the shaving foil is properly positioned,
push it into its end position with your finger
(fig. 31).