Table of Contents
Advertisement
5. Enter the same passcode on the other device (there will be a prompt to do so).
6. Select the service to use from the partner device, then select Finish. One of the
most common examples of this is to choose the Microsoft ActiveSync service from
the list of your PC's available Bluetooth services.
Receiving a File
Before receiving files, you must allow incoming beams. Select Start > Settings >
Connections tab > Beam, then enable the Receive all incoming beams option.
To receive beamed information, the device must first be made discoverable.
1. Select Start > Settings > Connections tab > Bluetooth,
then select the Mode tab.
2. Select Make this device visible to other devices.
3. On your PC (or other Bluetooth-enabled devices), locate the file or item you want
to send. For example, on your PC, you would use Windows Explorer to locate
the file.
4. In the example above, right-click the file and select the destination device under
"to Bluetooth".
5. Select Yes when the device prompts about receiving a file.
6. After the transmission process is finished, the file should be saved in My Documents on
the device.
78
Advertisement
Table of Contents
