Table of Contents
Advertisement
5. In Access point name, enter the access point name and then select Next. Access
point name will be provided by your carrier.
6. In User name, enter your user name for the GPRS network, if required.
7. In Password, enter a password, if required. This information is also provided by
your network operator.
8. If required, select Advanced and enter information related to Servers and TCP/IP.
9. Select Finish.
NOTE: The device cannot connect to a PC through ActiveSync while connecting to the Internet
using GPRS/EDGE/HSPA.
Creating a Dial-up Connection
Not all service providers support dial-up connection, please consult with your service
provider. You will need a phone number to connect to the Internet, a user name and a
password in order to continue the following steps.
1. Select Start > Settings > Connection tab > Connections.
2. Under My ISP, select Add a new modem connection.
3. In Enter a name for the connection, enter a name for the connection.
4. In Select a modem, select Cellular Line > Next.5. Enter the phone number
provided by your service provider, select Next.
6. Enter the user name and password, tap Finish.
67
Advertisement
Table of Contents
