A.O. Smith EQ 115 G Installation And User Instructions Manual page 25

Fault Possible cause
Insufficient Safety thermostat has
hot water, or closed the gas supply
none at all because the water
temperature was too high
Hot water storage empty
Cause cannot be
determined
Condensation of (flue)
Water
gasses
leakage
Insufficient sealing of the
water connections
(thread)
Leakage from other
water- appliances or
pipes near by
Condensation leakage
from the underside of the
appliance (usually during
the first warming-up
period).
Corrective action
Set the temperature regulator at a
lower temperature and reignite the
pilot burner.
Reduce the consumption of hot water.
Allow the appliance time to heat the
water.
Turn the control button to the (
position. Close the gas tap and inform
your installer.
See "Condensation".
Tighten the threaded connections.
Trace the cause.
Reduce your hot water use. Allow the
appliance enough time to warm up
water.
)
l