Panasonic WORKIO DP-130 Operating Instructions Manual page 67

Windows 2000/XP (User)
Advanced
1. Paper Size
Select a document size.
2. Resolution
Select the printer resolution (300dpi/600dpi).
3. Scaling
Specify custom zoom when printing a document by zooming in/out at a desired rate. If the zooming rate is
specifiable in an application, specify "100%" (same size) here. Specify a zooming rate in the print dialog
box of the application.
4. Metafile Spooling
With Metafile Spooling enabled, the file is spooled in EMF format (metafile compression). With the
function disabled, the file is spooled in RAW (non-compression) format. Specifying RAW format results in
longer time before placing an application operational after printing on the application.
Note: Spooling by EMF format may cause the following problems on some application software.
1)Printing result is different from the screen display.
2)Printing requires excessive time.
5. N in 1
For printing two or more pages on one sheet, specify a printing method.
Layout is selected by combining with "Orientation." Each layout is displayed with an icon.
2 in 1: Print 2 pages of documents zoomed out by 65 or 71% on one sheet.
4 in 1: Print 4 pages of documents zoomed out by 50% on one sheet.
6. Binding Margin (For DP-2000/2010E/2500/3000)
Select for ensuring the binding margin upon duplex printing.
Specifying On for Binding moves a printing area vertically or horizontally (for ensuring binding margin).
For specifying a margin in consideration of a double-page spread printing on application, specify Off for
Binding.
Width of binding margin is specified on the main unit.
Configuring the Printer Driver Settings
67