Panasonic Panafax UF-7000 Operating Instructions Manual page 88

No.
161 DNS SERVER
162 TIFF VIEWER URL
163 ROUTING HEADER
164 IFAX XMT HEADER
168 CC/BCC STATION
169 DHCP CLIENT
170
AUTHENTICATION
(See page 89, Note 3)
171 POP BEFORE SMTP
(See page 89, Note 3)
172 DIRECT IFAX XMT
173 DELIVERY NOTICE
174
AUTHENTICATION
(See page 89, Note 3)
177 XMT FILE TYPE
88
Setting Your Machine
Fax Parameters
Parameter Setting
Number
(Email only)
SMTP
(HOME)
APOP
Setting
1 Invalid Selecting whether to enable the DNS Server.
*2 Valid
1 None Selecting whether to include the URL address in the
email message body.
*2 English
3 English+
Japanese
*1 Invalid Selecting whether to add the Header Print information of
the Routing Station on the top edge of each routed
2 Valid
pages.
*1 Included Selecting whether to include the header when sending a
document to an addressee in the same Domain as
2 Not included
specified in the Default Domain parameter. (This is
useful when using the machine to scan documents back
to your PC)
Note: When sending to a Domain other than as
*1 Invalid Selecting whether to allow the CC/BCC email
address(es) to be entered.
2 Valid
1 Invalid Select whether the machine would automatically acquire
the Network Parameters from the DHCP Server. (Such
*2 Valid
as IP Address, Subnet Mask, Default Gateway IP
Address,etc.)
Note: If you change the setting of this parameter, turn
*1 Invalid If you transmit to the SMTP Server, user name and
password are used for authentication. Selecting "Valid"
2 Valid
allows you to set up the user name and password.
*1 Invalid If you transmit to the SMTP Server, POP user name and
2 Valid POP password are used for authentication.
*1 Invalid Selecting whether to be prompted during Auto Dialer
registration if the station you are programming is to
2 Valid
receive Internet Fax directly without going through a
Mail Server.
*1 Off Setting the home position of whether to request a
2 On Message Disposition Notification (MDN) for a delivery
processing confirmation indicating that the message
(email) was read, when sending an email/Internet Fax.
This setting will be the default value for the Function
Select Mode (F8-2).
*1 Invalid This parameter allows you to encrypt the protocol for the
POP password security when connecting with the POP
2 Valid
Server.
1 TIFF Selecting whether the document(s) are converted to
TIFF-F or PDF format when Scanning-to-Email, or TIFF-
*2 PDF
F format when sending to an Internet Fax.
The default is "PDF" as PDF has become the industry
standard for exchanging documents from computer to
computer (Scan-to-Email). However, PDF format cannot
be used for Internet Faxing (Internet Fax to Internet Fax)
as current Internet Fax specifications do not support
these file formats, and TIFF-F format must be used
when sending to an Internet Fax machine.
(This setting can be temporarily changed when sending
an Internet Fax with the Select Mode (F8-6)
"XMT FILE TYPE/NAME")
Comments
specified in the Default Domain parameter, the
header will be included regardless of the
selection.
the Power OFF/ON.