Panasonic Panafax UF-7000 Operating Instructions Manual page 86

No.
082 QUICK MEMORY XMT
088 LINE SELECTION
095 DUPLEX PRINT
097 SPECIAL TRAY
099 MEMORY SIZE
(SD Memory Card)
118 FAX FUNCTION DETECT
119 QWERTY KEYBOARD
121 Auto Reset Timer
122 DIAL PREFIX
140 LAN RELAY XMT
86
Setting Your Machine
Fax Parameters
Parameter Setting
Number
No.1 - 2
REQUEST
Setting
1 Invalid Selecting whether the machine performs Quick Memory
Transmission.
*2 Valid
Invalid : Stores all documents into memory first
Valid
*1 Auto Selecting the transmitting telephone line when the
optional G3 Communication Port Kit is installed.
2 Line-1
Auto
3 Line-2
Line-1
Line-2
Note: Regardless of the setting selection above, the
*1 Invalid Selecting whether the machine performs duplex print
when receiving the document via G3 Fax or Internet Fax.
2 Valid
*1 None Select a Special Tray that will not be used for printing
received faxes (Tray 1 or 2). One Tray must always be
2 Tray 1
available for receiving Faxes. This setting is available
3 Tray 2
when the 2nd Paper Feed Module Option is installed.
- - Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
1 Invalid Setting the number of digits required to determine the
entered number is a Fax Telephone number.
2 4-Digit
Upon detecting the specified number of digits, the
3 5-Digit
machine will automatically switch to the FAX Mode
*4 6-Digit
when it is in the Copier Mode.
5 7-Digit
6 8-Digit
1 One-Touch Selecting whether the QWERTY Keyboard functions as
*2 Quick Name a One-Touch Dialing Keys or as Quick Name Search
Search Keys of the station name.
One-Touch
Quick Name : Entering the letter(s) of the station
Search
1 OFF Selecting whether the control
2 30 sec. panel reset time.
*3 1 min.
4 2 min.
5 3 min.
6 4 min.
(----) Setting the Dial Prefix number (Max. 4-digits). When the
the machine detects a 10-digit telephone number
(excluding any characters; such as "-") being dialed, it
will automatically append the preset Dial Prefix number.
When the telephone number is Less or More than 10-
digits in length, the Dial Prefix number is not appended.
*1 Invalid Selecting whether the machine performs LAN Relay
XMT Request.
2 Valid
Comments
before dialing the telephone number.
: Starts dialing the telephone number
immediately after storing the first page.
: Selects the available telephone line for
transmission automatically.
: Selects Line-1 as the only transmitting
telephone line.
: Selects Line-2 as the only transmitting
telephone line.
unit will answer and receive on both telephone
lines.
: Each letter key is assigned with an
Email Address or a Telephone Number
for quick dialing.
name for quick name search of the
programmed station and quick dialing.