Panasonic Viera TH-42PX600 Operating Instructions Manual page 47

Recommended HDMI Connections
F-Type
Antenna
Adapter
S-Video signals have priority
Caution
•
For Antenna connection via VCR, please refer to the Operating Instructions for your VCR.
•
If you use both IR Blaster and "HDAVI Control" (P. 34) for the same Panasonic DIGA (with VCR type), please set
"Power off link" (under "Other adjust" of "Setup" menu ) to "No" (P. 34), to avoid failure for your recording.
(p. 36-37)
or
or
Audio cable
Note
•
The picture and audio input signals
connected to a terminal specified in "Prog-
out stop" (p. 32) cannot be output from
"OUTPUT" terminals. However, audio
output can be obtained from the optical
Digital Audio Out terminal.
•
To prevent howling and image oscillation, set
the "Prog-out-stop" setting when connecting
VCR with loop-connection. (p. 32)
•
When a device (STB, DVD, etc.) is
connected to the HDMI or COMPONENT
terminals, only audio signals will be
output. No video signals will be output.
To watch digital video image
or
HDMI-DVI
conversion
cable
DVD Player or Set Top Box
(HDMI compatible machines only)
To listen to the TV through
speakers
Amplifier
•
Turn Off the TV speakers.
(p. 32 "Speakers")
HDMI
cable
47