Panasonic Viera TH-42PX600 Operating Instructions Manual page 36

Control with HDMI "HDAVI Control
Follow the connection diagrams below for HDMI control of
a single AV piece of equipment such as a Panasonic DIGA-
DVD recorder, RAM Theater or Player Theater system.
Refer to page 34 for Setup Menu settings and additional
control information.
Optional HDMI and/or optical cables are not provided.
Connecting this unit to a DVD recorder, RAM theater or Player theater
Back of the unit
HDMI
(AV OUT)
DIGA
(Panasonic DVD Recorder)
Setting of this unit after connection
After making connections as shown above, set "Ctrl with HDMI" (under "Other adjust") to "On" using the Setup
menu. (p. 34).
Note
•
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their
respective operating instruction manuals.
36
Recommended HDMI Connections
HDMI cable
HDMI
(AV OUT)
or
Panasonic RAM theater
If connection (or setting) of equipment compatible with HDMI
control is changed, switch the power of this unit Off then On
again while the power of all equipment is On (so that the
unit can correctly recognize the connected equipment) and
check that DIGA, RAM theater and Player theater playback
operates.
•
For DIGA :
Connect with HDMI cable
•
For RAM theater and Player theater :
Connect with HDMI cable and audio
cable.
Connect the TV's PROG. OUT audio
(L&R) to listen to the TV program
through the theater system.
•
HDMI 1 is recommended.
When connecting to HDMI 2, set the
input mode to HDMI 2 (p. 29) initially
before connecting to HDMI 2. After
connection, confirm the HDMI control
functions (p. 34-35).
Audio HDMI
IN (AV OUT)
or
Panasonic Player theater
TM
Note
Audio Cable
Audio
IN
"