Panasonic Viera TH-42PX600 Operating Instructions Manual page 11

CableCARD TM allows you to tune digital and high definition cable channels through the cable antenna.
Consult your cable company on the availability of CableCARD
1. Connect the cable antenna to ANT connector.
2. Turn the TV on (see page 17).
3. Set the input mode to TV (see page 29).
4. Insert the CableCARD TM
it will go into the CableCARD
Follow the messages displayed on the screen.
Note
•
If you experience front panel control or remote control function hang-up when using CableCARD
TV and plug it back on and try the controls again. If this condition persists, please call Panasonic Customer Call
Center for further instructions.
•
Do not insert a PCMCIA card into CableCARD
Fixing connection cables and AC cord
Example of "connection cable routing"
AC cord
Cable
clamper
Band
Attach the bands
Fastening band
Band
Insert the spigot on the two bands into the
pedestal.
Fastening
push the tip of the band in the
direction indicated by the arrow.
Loosening
While pressing down on the
tab, gently push the tip of the
band in the direction indicated
by the arrow.
CableCARD
(with upper side facing you) as far as
TM
slot on the back of the TV.
Upper side of the card facing you
(
TM
slot.
Cable Binding Instructions
Connect power
plug to the socket
of the main body.
Fix the AC cord in
Cable clamper.
TM
Connection
TM
.
Insert mark (e.g.)
TM
The CableCARD design varies
depending on the manufacturer.
How to fix:
Fix by pushing
in till a clicking
sound is heard.
•
Do not bundle the RF cable and AC cord together
(could cause distorted image).
•
Fix cables with Cable clampers as necessary.
•
When using the optional accessory, follow the
option's assembly manual to fix cables.
Attaching the Cable clampers
Snap open
Remove from the TV unit
Tab
Back of the TV
)
TM
, unplug the
How to release:
Pull up while
drawing the
knob.
Snap shut
Push both side
hooks and pull out
11