Table of Contents
Advertisement
Warning and Instruction Displays
These displays will alert you to a missed operation or provide further instructions.
OSD
PLEASE SET CLOCK BY
PRESSING ACTION KEY
CHECK CASSETTE
RECORD TAB
TO CANCEL TIMER REC
HOLD DOWN STOP KEY
FOR APPROX 3 SEC
NO CASSETTE
PLEASE PREPARE
FOR TIMER REC
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END: PLAY
VCR LOCK ACTIVATED
PLEASE CHECK THE DISC,
AND FOR STAINS OR SCRATCHES
ON DISC
THIS DISC MAY NOT BE PLAYED
IN YOUR REGION
THIS TYPE OF DISC CANNOT BE
PLAYED. PLEASE INSERT A
DIFFERENT DISC
CAUTION
If you attempt to set or review a Timer
Recording or set the On-Timer and the Clock
is not set...
If you press REC, and a cassette is inserted
with no record tab...
If you press STOP during a Timer Recording...
If you press PLAY, FF, REW, or REC without a
cassette inserted...
If the unit is not in Stop mode, or cassette is
not inserted, or cassette has no record tab, or
tape is at its end two minutes before a Timer
Recording is about to begin...
If head cleaning becomes necessary while
playing back a tape...
If you press a function button other than
STOP/EJECT or POWER while the unit is in
VCR Lock mode...
If you press PLAY, or the unit reads data from
a stained or scratched disc in DVD mode.
Also, if the type of disc is other than DVD or
CD...
Playback of a disc with different region number
was attempted. Only discs marked region "1,"
"ALL," or those that include "1" are playable on
this unit.
An unusable disc is inserted in the unit, or the
disc is not inserted with label side up.
Page
20
8, 30
35
30-31
34-35
8
37
10
10
9
67
Advertisement
Table of Contents
