[Scenery]; [Panorama Assist] - Panasonic Lumix DMC-TS1 Operating Instructions Manual

Advanced (Recording pictures)
Note
•
The focus range is about 30 cm (0.99 feet) to 1.2 m (3.94 feet).
•
You can take a picture of yourself with audio (P90). If you do this, the self-timer indicator will
light up while recording the audio.
•
The zoom magnification is automatically moved to Wide (1k).
•
The self-timer can only be set to off or 2 seconds. If it is set to 2 seconds, this setting will
remain until the camera is turned off, the scene mode is changed or [REC] mode or
[PLAYBACK] mode is selected.
•
The stabilizer function mode is fixed to [MODE2]. (P89)
•
The initial setting for [AF MODE] is [š].
This allows you to take pictures of a wide landscape.
Note
•
The flash setting is fixed to [Œ].
The focus range is 5 m (16.4 feet) to ¶.
•
You can take pictures with connections suitable for creating panorama images.
∫ Setting the recording direction
1
Press 3/4 to select the recording direction and then press
[MENU/SET].
•
The horizontal/vertical guideline will be displayed.
2
Take the picture.
•
You can retake the picture by selecting [RETAKE].
3
Press 3 [NEXT] to select and press [MENU/SET].
•
You can also press the shutter button halfway to set the menu.
• Part of the recorded image is displayed as a transparent image.
4
Take picture after moving the camera
horizontally or vertically so the transparent image overlaps.
• When taking the third and later pictures, repeat steps
•
You can retake the picture by selecting [RETAKE].
5
Press 3/4 to select [EXIT] and then press [MENU/SET].
Note
•
It will be a normal motion picture recording during the motion picture recording.
•
The flash setting is fixed to [Œ].
•
The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
• The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
•
We recommend using a tripod.
•
The recorded images can be combined into panorama pictures using the software "ArcSoft
Panorama Maker" on the CD-ROM (supplied).
60
VQT1Z45

, [SCENERY]

[PANORAMA ASSIST]

3 4
and .