Basic; Taking Pictures Using The Automatic Function (Ñ: Intelligent Auto Mode); Scene Detection - Panasonic Lumix DMC-TS1 Operating Instructions Manual

ñ
[REC] mode:

Basic

Taking pictures using the automatic function
ñ
( : Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording
conditions so we recommend this mode for beginners or those who want to leave the
settings to the camera and take pictures easily.
•
The following functions are activated automatically.
–
Scene detection/[STABILIZER]/[INTELLIGENT ISO]/Face detection/[QUICK AF]/
[I.EXPOSURE]/Digital Red-eye Correction/Backlight Compensation
Set the mode dial to [ñ].
Press the shutter button halfway to focus.
• The focus indication 1 (green) lights when the subject
is focused.
•
The AF area 2 is displayed around the subject's face
by the face detection function. In other cases, it is
displayed at the point on the subject which is in focus.
•
The focus range is 5 cm (0.17 feet) (Wide)/30 cm
(0.99 feet) (Tele) to ¶.
•
The maximum close-up distance (the shortest distance
at which the subject can be taken) differs depending on
the zoom magnification.
Press the shutter button fully (push it in
further), and take the picture.
•
The access indication (P21) lights red when pictures are
being recorded on the built-in memory (or the card).
∫ When taking pictures using the flash (P48)
∫ When taking pictures using the zoom (P41)
∫ When recording motion pictures (P68)
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its color changes to the usual red.
>
¦
[i-PORTRAIT]
[i-SCENERY]
[i-MACRO]
[i-NIGHT PORTRAIT]
[i-NIGHT SCENERY]
[i-BABY]

Scene detection

¢
•
Only when [‡] is selected
• Only when [Œ] is selected
Basic
1
2
VQT1Z45
35