Economy; Auto Review; No.reset - Panasonic Lumix DMC-LS80 Operating Instructions Manual

Press [ ] to display menu, enter the setup menu [
The setting marked "q" means it is the initial setting.
Restrict battery consumption

ECONOMY

POWER SAVE
If you perform no operations, the camera
turns off automatically after the interval
you set.
OFF
1 MIN.
2 MIN.
q 5 MIN.
10 MIN.
• Press the shutter button halfway or
restart the camera to cancel.
• Power save is fi xed to [5 MIN.] in
intelligent mode [
• This function is not activated in the
following cases.
– When connected to the PC / printer
– While recording / playing back motion
pictures
– While performing slide show
AUTO LCD OFF
LCD monitor is turned off automatically
while the camera is not in use for the set
time. (in recording mode only)
q OFF
15 SEC.
30 SEC.
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn on the LCD monitor again.
• This function is not activated in the
following cases.
– While a menu screen is displayed
– While the self-timer is set
– While recording motion pictures
22
VQT1L50
Preparation
].
] and select the item.
Show images you have taken.
P

AUTO REVIEW

Adjust how long the recorded picture
automatically appears on the screen.
OFF
1 SEC.
q 2 SEC.
HOLD
ZOOM
• When [HOLD] is selected, the picture
remains on the display. Press [MENU/
SET] to cancel.
• When [ZOOM] is set, the picture is
displayed for 1 second, then at 4 × zoom
for further 1 second.
• AUTO REVIEW works even if set to
[OFF] in [AUTO BRACKET], [BURST] or
[HI-SPEED BURST]. However, [HOLD]
and [ZOOM] are disabled.
• You can not change settings in
[AUTO BRACKET], [BURST], [SELF
PORTRAIT], [HI-SPEED BURST] and
motion picture modes [
• Fixed to [2 SEC.] in Intelligent mode [

NO.RESET

2
Set this when you want to start the fi le
number of the picture from 0001 on the
next recording.
• The folder number is updated, and the
fi le number starts from 0001.
• The folder number can be assigned from
100 to 999. When the folder number
reaches 999, it cannot be reset. We
recommend formatting the card after
saving the data on a PC or elsewhere.
• To reset the folder number to 100, you
must fi rst reformat the built-in memory or
the card. After this perform [NO.RESET]
to reset the fi le number, after which a
screen appears asking whether you want
to reset the folder number. Select [YES].
( P20 )
].
i
].