[Economy] - Panasonic LUMIX DMC-TZ82 Operating Instructions Manual

For details on how to select the [Setup] menu settings, refer to (→65).

[Economy]

Turn off the camera or make the monitor go dark while not using the camera or if no
operation is performed for a preset period of time to minimise battery consumption.
■
[Sleep Mode]
TZ100/TZ101
The camera is automatically turned off if the camera has not been used for the time
selected on the setting.
Settings: [10MIN.] / [5 MIN.] / [2 MIN.] / [1 MIN.] / [OFF]
• To restore → Press the shutter button halfway, or turn the camera [ON/OFF] switch to
■
[Auto Power Off]
TZ80/TZ81/TZ82
The camera is automatically turned off if the camera has not been used for the time
selected on the setting.
Settings: [10MIN.] / [5 MIN.] / [2 MIN.] / [1 MIN.] / [OFF]
• To restore → Press the Camera [ON/OFF] button
■
[Auto LVF/Monitor Off]
The monitor is automatically turned off if the camera has not been used for the time
selected on the setting.
Settings: [5 MIN.] / [2 MIN.] / [1 MIN.]
• To restore → Press any button or touch the monitor.
●
This function is not available in the following cases:
• During motion picture recording/playback
• When recording with [
• When [Multi Exp.] is set
TZ100/TZ101
• When connected to computer/printer
• During Slide Shows
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
• While the HDMI output is being used for recording
TZ100/TZ101
●
TZ100/TZ101
When using the AC adaptor (optional) and DC coupler (optional), the [Sleep Mode] is disabled.
●
TZ80/TZ81/TZ82
When using the AC adaptor (optional) and DC coupler (optional), the [Auto Power Off] is disabled.
●
When using the AC adaptor (optional) and DC coupler (optional), [Auto LVF/Monitor Off] is fixed to
[5 MIN.].
81
[OFF] and then turn it [ON] again
] ([4K Pre-Burst]) of the 4K Photo function
Basics
Using the [Setup] menu
DVQP1246