Panasonic Lumix DMC-FX5 Operating Instructions Manual page 24

Panasonic lumix dmc-fx5: operating instruction
Table of Contents

Advertisement

You can control the following items on [SETUP] Menu.
Menu
MONITOR
AUTO
1
REVIEW°
POWER SAVE
1
°
Recording mode only
Preparation
Adjust the brightness of the LCD monitor in 7 steps.
• [OFF]:
The recorded picture does not automatically
appear.
• [1SEC.]: The recorded picture automatically appears
on the screen for about 1 second.
• [3SEC.]: The recorded picture automatically appears
on the screen for about 3 seconds.
• [ZOOM]: The recorded picture automatically appears
on the screen for about 1 second. Then it is
enlarged 4 times and appears for about
1 second. This mode is useful to confirm the
focus.
• In Motion image mode [
[
], auto review function is not activated.
• When using burst mode or auto bracket, the auto review
function works while recording the data into the card
regardless of the setting on the auto review function.
(The picture is not enlarged.)
• When using pictures with audio, the auto review
function works while recording the audio or the data into
the card regardless of the setting on the auto review
function. (The picture is not enlarged.)
• [2MIN.]/[5MIN.]/[10MIN.]:
The camera is automatically turned off if it has
not been used for a predetermined amount of
time.
(Press the shutter button or turn the camera off
and on to cancel the power save mode.)
• [OFF]: The camera is not automatically turned off.
• When using the AC adaptor/connecting to a PC or
printer/recording motion images/playing back motion
images/during Slide Show, the power save mode is not
activated.
• When you press the [DISPLAY] button for 2 seconds,
the power save mode is activated. (You can turn the
camera on again when pressing the shutter button
halfway.)
24
Functions
] and Self-portrait mode

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmcfx5pp - digital still cameraLumix dmc-fx5pp

Table of Contents