5
(When [SELECT] is selected in step 4)
Touch the range of pictures that will be stored.
≥ Previous (Next) page is displayed by touching
.
* Only select the picture for start point if only 1 picture
is to be stored.
≥ A confirmation message is displayed when [Enter] is
touched after selecting the start point and finish
point. Touch [YES] to store the pictures.
≥ If you turn off the unit or change the mode, this function is cancelled.
≥ The maximum number of times you can record on a media: 15
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥ Colour balance and brightness on the screen may change with some light sources such as
fluorescent lamps.
≥ Image quality is different from ordinary still picture recording.
[AF ASSIST LAMP]
The photo light is turned on to make it easier to focus when you are recording in dark places
where it is hard to focus.
≥ Switch to manual mode. (l 68)
: [PICTURE] # [AF ASSIST LAMP] # [AUTO]
MENU
≥ Set the photo light to
≥ When switching to intelligent auto mode, the setting is fixed to [AUTO] and cannot be
changed.
≥ It may not turn on when the LED light is very hot.
[SHTR SOUND]
You can add a shutter sound when recording still pictures.
: [PICTURE] # [SHTR SOUND] # desired setting
MENU
[OFF]:
Cancel the setting.
:
Volume low
:
Volume high
≥ No shutter sound is emitted in motion picture recording mode.
( [OFF]). (l 52)
([AUTO]) or
/
*
A Start point
B Finish point
67
VQT3J26