Panasonic HDC-TM80 Operating Instructions Manual page 135

LCD monitor
≥ When the LCD monitor gets dirty, wipe it
with a soft cloth, such as eye glass
cleaner.
≥ Do not touch the LCD monitor with your
finger nails, or rub or press with strong
force.
≥ It may become hard to see or hard to
recognise the touch when the LCD
protection sheet is affixed.
≥ In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth,
such as eye glass cleaner.
≥ When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the unit is turned
on. The normal brightness will be restored
when the unit's internal temperature rises.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
230,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
About personal information
After you have set up the face recognition
function, personal information will be held in
this unit and included in recorded images.
≥ When the unit is serviced, or given away/
disposed of, the personal information
should be deleted in the interests of
protecting personal information. (l 85)
Indemnity
≥ Information, including personal
information, may be changed or lost as a
result of mistaken operation, static
electricity effects, accident, breakage,
repair or other handling.
It should be noted before use that
Panasonic does not accept any
responsibility for direct or indirect
problems which occur as the result of the
change to or loss of the information
including personal information.
135
VQT3J26