Viewing Minutes Usage - Palm Treo 650 Using Manual

Using Flash mode during an Active call
Flash mode allows you to manually manage your calls
while one or more calls are active. This is often used
during a conference call when one of the calls is ended,
but the other remains connected.
1. Press Phone/Send
Conference call to enter Flash mode.
2. Dial a number using any of the methods described in
Dialing Calls. Select Main View to return to the main Phone view to dial
another number.

Viewing minutes usage

1. Select the Call Log favorite button.
2. Open the menus
3. Select Totals.
4. (Optional) To reset the counters to zero, select Reset
Counters.
5. Select Done.
Choosing your privacy settings
To maintain privacy, you can encrypt conversations when you place or receive calls,
provided that this feature is supported by the network. You can also choose whether
your longitude and latitude position are available to the network and third-party
applications at all times or only during an emergency call.
1. Press Phone/Send
2. Open the menus
3. From the Options menu, select Phone Preferences.
4. Check the Enable Voice Privacy box (voice conversations will be encrypted).
while in an Active call or
.
.
.
In Flash mode, pressing the
Phone/Send button will
either place your current
call on hold, allow you to
dial another call, or swap
between active calls,
depending on the state of
your active calls.
Want to see how long you
spent on a particular call?
From the Call Log, select
the call, and then select
Details. Keep in mind that
your billing statement may
vary slightly from the
information you see
onscreen. Usage is charged
based on your calling plan,
and calling plans vary.
More ways to manage calls :: 51