Receiving Beamed Information - Palm Treo 650 Using Manual

130 :: Beaming information
7. When the Beam Status dialog box appears, point the IR port on your smartphone
directly at the IR port of the receiving device.
8. Wait for the Beam Status dialog box to indicate that the transfer is complete
before you continue using your smartphone.

Receiving beamed information

1. Turn on your screen.
2. Point the IR port on your Treo smartphone directly at the IR port of the transmitting
device to open the Beam Status dialog box.
3. When the Beam dialog box appears, select a category for the entry.
4. Press Up to receive the beam or press Down to refuse it.