Precautions - Optoma HD33 User Manual

N
OTE
When the lamp
™
reaches the end
of its life, the pro-
jector will not turn
back on until the
lamp module has
been replaced. To
replace the lamp,
follow the proce-
dures listed under
"Replacing the
Lamp" section.

Precautions

Please follow all warnings, precautions and mainte-
nance as recommended in this user's guide.
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
Usage Notice
Do not look into the projector's lens when the
lamp is on. The bright light may hurt your eyes.
To reduce the risk of fire or electric shock, do
not expose this projector to rain or moisture.
Please do not open or disassemble the projec-
tor as this may cause electric shock.
When replacing the lamp, please allow the unit
to cool down.
This projector will detect the life of the lamp
itself. Please be sure to change the lamp when
it shows warning messages.
Reset the "Lamp Reset" function from the on-
screen display "System|Lamp Setting" menu
after replacing the lamp module.
When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the
projector to cool down.
Do not use lens cap when projector is in opera-
tion.
When the lamp is approaching to the end of
its life time, the message "Replacement sug-
gested" will show on the screen. Please contact
your local reseller or service center to change
the lamp as soon as possible.
3
English