User Controls; Remote Control - Optoma HD33 User Manual

User Controls

20
English

Remote Control

Using the Remote Control
Power On
Power Off
Lamp Mode
Mode
4:3
16:9
LBX
Native
Brightness
Contrast
PureEngine
3D Format
Turn on the projector.
Turn off the projector.
Increase the brightness of the image.
Select the display mode from Cinema,
Bright, Photo, Reference, 3D, ISF Day, ISF
Night and User.
Scale the image to 4:3 aspect ratio.
Scale the image to 16:9 aspect ratio.
Enable the viewing of the letterboxed nonan-
amorphically enhanced movie at full screen
width. Part of the original image will be lost if
the image aspect ratio is less than 2.35:1.
The input source will be displayed without
scaling.
Adjust the brightness of the image.
Control the degree of difference between the
lightest and darkest parts of the picture.
The PureEngine is a collection of advanced
image processing technologies that
enhances the quality of the displayed image.
Press "3D Format" to switch between "Off"
and "SBS", use up/down button to switch to
"Top and Bottom" or "Frame Sequential then
press "Enter" to confirm.