How To Set The Functions; How To Make Function Settings; Setting Functions Using The Control Panel Screen; Basic Detailed - Olympus EVOLT E-510 Instruction Manual

How to set the functions

How to make function settings

There are three basic ways to make function settings with this camera.
• Setting while looking at the control panel screen (See below)
• Setting using direct buttons (gP. 20)
• Setting on the menu (gP. 21)

Setting functions using the control panel screen

Select an item on the control panel screen and
change the setting.
1
When the power switch is set to ON,
the control panel screen (shooting
information and setting screen) is
displayed on the LCD monitor.
• The display changes each time the INFO
button is pressed.
• You can also display the control panel screen
by pressing the i button and change the
setting when using live view.
Control panel screen
2007.08.16

Basic

2
Press the i button.
• The cursor (function being selected) on the control panel screen lights (1).
e.g.) When setting Sequential/Self-timer/Remote control shooting
1
Cursor
3
Use p to move the cursor to the function you want to set (2).
4
Turn the control dial to change the setting.
• Pressing the i button while the item is being selected displays the direct menu for that
function. You can also use the direct menu to change the setting (3). After changing the
setting, press the i button to confirm your setting. Or if you do not operate the control dial
within a few seconds, your setting will be confirmed and the control panel screen will be
restored. g "Button timer" (P. 84)
INFO button
2007.08.16
Detailed
2
Power switch
Control dial
p Arrow pad
i button
Display off
3
Direct menu
1
19
EN